The wheels of most models in our shop are fixed and cannot be turned. The model cannot be pushed, has no pull-back function, does not fly, does not glow, and has no remote control function. The wheels of some vehicle model products are off-the-shelf accessories and can be turned. Do not allow children under 8 years of age to touch, so as not to be scratched or broken by acute Angle parts. Models of people, vehicles, platforms, etc. The model material of this shop is photosensitive resin. The resin material will be deformed after being squeezed for a long time, and it can be corrected by heating it with a hair dryer for about 40 seconds. Do not use this product as an interior decoration to avoid sunburn or scratching. This store only contains 3D printed parts, water stickers, the actual content of the product color classification of the picture prevail. This shop is a DIY product, no manual, no special packaging box, no attached glue, paint and other production tools, declined to return on the grounds that there is no gift tools. It is not recommended for beginners who have not made models to make this shop model. Children under 16 years old are not recommended to make this model. Do not return a product on the grounds that it will not be made. The model of this shop is printed by a professional 3D printer, and has been preliminary polished by workers. Most of the layered grain has been polished, and some fine parts are inconvenient to be polished in bulk, so players need to polish them. The body of our model is printed in one piece, requiring only a small amount of splicing work. Most of the parts of our model are connected by magnets, magnets are recommended to use photosensitive glue to stick to the model, pay attention to the direction of the magnetic pole of the magnet should be the same, so as not to install the parts. It is recommended that all mounts of the same model have a unified magnetic pole orientation, so that the missile can be mounted on different mounts. 3D printed products need to spray water to fill the soil and then color, otherwise it is easy to fall off the paint. Some parts need to be glued directly to the fuselage, it is recommended to use photosensitive glue splice, 502 and other parts of the traditional glue is not strong. Most of the water stickers of the model in this shop are divided into blocks, and a few stickers are integral, which need to be cut and used. About the finished product. The finished product model of our shop is hand-made by OEM masters, and the actual finished products of different batches of different masters will have certain differences. Hand-made models inevitably have some flaws, can not be compared with the machine mass production of the finished product, mind please do not shoot! The picture of the finished product is for reference only, and there will be some differences with the actual finished product. Finished models generally need 2-4 weeks of thoughtful goods, some products are in stock, can not wait to shoot!